The Fermax 8854 flush-mounted box allows the installation of a 4-series City model street sign.

In the case that several plates are combined, always of the same series, it is necessary to use a set of spacers for a perfect coupling. One set is required for each additional plate that is installed between the recess boxes.

This recess box measures 115x185x 45 mm (horizontal-vertical-depth).

With what plate can I use this recess box?

The Fermax 8854 recess box can be used in installations with a street plate of a series 4 size, such as the Fermax 3330 kit, which can be found by clicking on the following link.

Where is the Fermax 8854 recess box installed?

The box 8854 is recessed, that is, we have to have a hole made in the wall to be able to install, however, if we want to install it on the surface, we will have to use a box for surface, as can be The box 7064 of Fermax, also of the Series 4, which we can find in the following link.

There are also other accessories that can be installed in our street plate, such as the visor of the series 4, perfect to protect our plate from the sun or rain. In this case we will need the Visor 8403 from Fermax.