The flush-mounted box 8853 from Fermax is a flush-mounted box of size S3 for the installation of a street panel.
What technical characteristics does the 8853 flush-mounted box have?
- To install a plate it is necessary to place a box on the wall or wall where we will later fix the plate.
- They are made of aluminum and zamak.
- They have folding hinges in any direction, which allow to hold the plate while wiring is done.
- They have circular marks split into the bottom of the box, which are punctured with a slight blow or pressure, thus allowing the passage of the cables.
- One set is required for each additional plate that is installed between the flush-mounted boxes.
- Recessed box
- Series 3
- Measures: 4.5x16x11.5 cm (horizontal-vertical-depth).