The SAI 13082 of NEW SAI allows the feeding of 4 simultaneous equipments with an autonomy of 23 minutes.
What technical characteristics does the 13064 UPS have?
- AVR for voltage stabilization with elevator and reducer
- Controlled by microprocessor to guarantee high reliability
- Start function without network of the entry company
- Automatic start after returning the AC network
- Simulated sinusoidal output wave works with GENERATORS
- Battery charging even when the device is stopped in OFF mode
- Super fast charger 90% charged in 6 - 8 hours.
- Topology Green Power, saving 50% of energy in AC mode
- Include USB communication and RJ-11 port for phone protection
- Self-diagnostic function every time we start the equipment
- RS232 port for control and operation of the UPS using software
- Simple and easy installation of use and operation
What technical specifications does the 13064 UPS have?
- Power: 800 VA / 480 W
- Voltage: 110/120 VAC or 220/230/240 VAC
- Voltage Range: 81-145 VAC / 162-290 VAC
- Frequency Range: 60/50 Hz (auto detection)
- AC Voltage Regulation (Battery Mode): ± 1%
- Option DC Voltage (USB): 5 V
- Frequency Range (Battery Mode): 60 Hz or 50 Hz ± 1 Hz
- Transfer Time: Typical 2-6 ms, maximum 10ms.
- Wave Type (Battery Mode): Simulated Sine Wave
- BATTERIES
- Type of Batteries and Number: 12 V / 9 Ah x 1
- Time Autonomy (Load 1PC 99 W): 23 min
- Typical Recharge Time 6 - 8 hours recovers up to 90% capacity
- INDICATORS
- AC mode: On green
- Battery Mode: Blinking amber
- Fault Mode: Red on
- Total Protection: Protection against overcharging, discharge and overcharging of batteries
- ALARMS
- Battery Mode: Beep every 10 seconds
- Low Battery: Beep every second
- Overload: Beep every 0.5 seconds
- Battery Replacement Alarm: Beep every 2 seconds
- Fail: Continuous beep.