Switch L2+ de 24 puertos Gigabit PoE+ y 4 SFP+ con gestión Cloud/Local/ezMaster
¿Qué especificaciones técnicas tiene el Switch EnGenius ECS1528P?
- Network Ports:
- (24) 10/100/1000 Mbps Gigabit
- (4) 10/100/1000/10000 Mbps SFP+
- Switching Capacity: 128Gbps
- SDRAM: 512MB
- Flash Memory: 128MB
- PoE Capable Ports: 1-24
- Total PoE Budget: 410W
- Power Source: 100 ~ 240VAC, 50-60Hz
- Physical Interface
- LED Indicators
- Power LED
- Fault LED
- PoE Max LED
- LAN Mode LED
- PoE Mode LED
L2 Features
- Network Management
- EnGenius Cloud
- ezMaster
- Local Web GUI
- MAC Address Table
- Jumbo Frame: 9K
- Multicast Group: Max 256 groups
- MLD Snooping: v1
- Bandwidth Control: Port-based bandwidth control (Ingress/Egress)
- Port Security: Max. 256 Entries
- Access Control List (ACL)
- MAC Based ACL
- IPv4/IPv6 Based ACL
- ACL Binding
- Timebase ACL
- Web Graphical User Interface (GUI)
- HTTP IPv4 / IPv6
- HTTPS IPv4 / IPv6
- SSL Certificate: Certificate/Key Import
- SNMP v1/v2c/v3 Support
- RMON 1,2,3,9
- Time Setting/Daylight saving
- Common L2 Features
- 802.1d Spanning tree
- Loopback Detection
- Multicast Filtering
- IGMP Multicast Forwarding
- IGMP Snooping
- MLD Multicast Forwarding
- 802.1Q VLAN tagging
- 802.3x flow control
- 802.3ad Link Aggregation
- IPv4 DHCP Relay
- IPv4 DHCP Snooping
- IPv4 DHCP Snooping Source MAC Address Check-up
- ARP Inspection
- ARP Packet Validation (additional validation checks)
- Voice VLAN
- Port-based VLAN
- Protocol-Based VLAN
- CoS Mapping
- 802. 1X Radius Authentication Protocol
- IEEE 802. 3az Energy Efficient Ethernet (EEE)
- Command Line Interface (CLI)
- SSH Server
- Telnet Server
- TFTP Client
- Configuration Upgrade/ Backup
- Simple Network Time Protocol (SNTP)
- SYSLOG
- 802.1d Spanning tree
L3 Features
- Multiple IP Interface: 20 IPv6 address
- ARP Table: Max. 192 ARP entries
- Static ARP: Static 192 ARP entries
- IPv4 Static Route: Max. 63 entries
- IPv6 Static Route: Max. 21 entries