Eutonomy euFIX adapter for mounting Fibaro Single Switch FGS-213 module on DIN Rail
What technical specifications does the euFIX S213 DIN Adapter have?
- DIN adapter for Fibaro Single Switch FGS-213 with pushbuttons
- It is used to install the Fibaro Single Switch FGS-213 module on the type DIN rail in the electrical panel
- Free location on the label to locate the marked line
- Supply voltage: 230 V AC +/- 10%, 50-60Hz
- Charging power: max. 8 A (resistive load)
- Dimensions: 34.8 x 87.3 x 64.7 mm
- Width in TE units: 2 TE modules
- Wire conductor cross section: max. 2.5 mm2
- Maximum length of cables connected to inputs Sx, S1, S2: 10m
- Operating temperature: 0 ° C to +35 ° C
- Relative humidity: ≤90%, non-condensing
- Normative:
- LVD 2014/35/CE
- RoHS 2011/65/EU