Technical Specifications of the FGD-212 Module for Fibaro lighting
Smart module for lighting regulation by Fibaro, compatible with Z-Wave home automation network.
What functions does the FGD-212 module of Fibaro have?
Compatible with any Z-Wave or Z-Wave+ Controller
Advanced microprocessor control
Implemented algorithm of smart light source detection
Auto-adjustment of the appropriate control mode to connected load
Active power and energy metering functionality
Soft start function
Memory of the last lighting level settings
Works with various types of switches – momentary, toggle, three-way, etc.
Active element: semiconductor electronic switch
To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations
FGD-212 is an extension unit
What technical specifications does the FGD-212 Fibaro module have?
Power supply: | 100-240 V~ 50/60 Hz |
Power consumption: | < 1.3W |
Operational temperature: | 0-35°C |
Dimensions (L x W x H): | 42.5 x 38.25 x 20.3 mm |
For installation in boxes: | Ø ≥ 50mm |
Operational current: | 0.25-1.1A |
Device temperature protection: | 105°C |
Active element: | semiconductor electronic switch ε |
Device control: | remotely – radio waves directly – external switch |
Radio protocol: | Z-Wave |
Radio signal power: | up to 1mW |
Radio frequency: | 868.4, 869.85 MHz EU; 908.4, 916.0 MHz US; 921.4, 919.8 MHz ANZ; 869.0 MHz RU; 919.8 MHz HK; 868.1 MHz MY; 865.2 MHz IN; 915.0 Mhz – 917.0 Mhz IL; 922.0 MHz – 926.0 MHz JP; 868.4 MHz CN, KR; |
Radio transmit power: | up to 6 dBm (EIRP) |
Range: | up to 50 m outdoors up to 30 m indoors (depending on building materials) |
Comply with EU directives: | RED 2014/53/EU RoHS 2011/65/EU |