Double Potential Free Relay Module to control devices remotely with Z-Wave Plus
What are the main features of the Fibaro FGS-224 Z-Wave Module?
FUNCTIONS:
- Controls two lights / devices remotely Installs behind an existing switch (bistable or monostable)
- ON / OFF function
- Two potential free relays (door control, boiler, garage door, etc.)
- Integrates the Z-Wave 500 series chip 250% faster
- Communication compared to standard Z-Wave
- Devices Integrated scene trigger mechanism (via S2)
- Security communication and notification classes
- Diode configuration menu
- Supports secure mode (Z-Wave Network Security) encrypted with AES-128 encryption
- Integrated Z-Wave Network Coverage Tester
- OTA software update (depends on controller)
- Larger terminal blocks for easier wiring
- Rounded shape to meet the highest standards
- Small, discreet and aesthetic
- Ease of use and installation
TECHNICAL CHARACTERISTICS:
- Module type: Z-Wave receiver
- Power supply: 100 - 240V ~, 50 / 60Hz or 24 - 30 Vdc
- Wiring: 3 wires, neutral required (230V)
- Maximum power:
- Maximum current per output: 6A / 110-240V ~, 50/60Hz (differs depending on the type of load)
- Total maximum current: 9.5A / 110-240V ~, 50/60Hz (differs depending on the type of load)
- Frequency: 868.42 Mhz
- Transmission distance: 50m free field, 40m indoors (depends on building structure)
- Signal strength: 1mW
- Dimensions: 42.5mm x 38.25mm x 20.3mm (L x W x H)
- Operating temperature: 0-35 ° C
- Standards: CE, ROHS, 2011/65 / EU, 2014/53 / EU, 2015/863, ZWAVE PLUS