Technical Specifications of the Honeywell Dual Tec Grade 3 PIR Motion Detector
Technical characteristics:
Plug-in electronics
Integrated end-of-line (EOL) resistors
Walk test activation
mirror optics
Safety grade 3 certificate
Active infrared anti-masking technology
Wide detection coverage
Professional design
Proprietary PIR signal processing solution
Patented zero angle solution
Patented self-diagnosis solution
Patented inertial sensor
Patented installation solution
SPECIFICATIONS: | |
Detection type | PIR (mirror) + microwave |
Coverage | 16 x 22m |
RFL | Alarm and tamper: 1K, 2K2, 4K7 and 5K6; default = 1K Anti-masking*: 2K2, 3K; default = 3K |
Detection zones | Long range 36, intermediate range 10, short range 12 and zero angle 2 |
walk test | 30s |
Frequency | Band-X: 10.525 GHz |
RF Immunity | 15 V/m, 80 MHz – 2.7 GHz |
Mounting height | 2.3 m (optimal) |
Power requirements | 9 – 15VDC |
Consumption at temp. atmosphere | 9 mA typical, 14 mA max. |
alarm relay | Form A/30 mA at 25 VDC, max. 22 Ohm/Duration: 3 s |
Anti-masking relay*/fault | Form B/30 mA at 25 VDC, max. 22 Ohm |
Tamper | Form A/30 mA at 25 VDC - Opening and wall |
Operating temperature | From -10ºC to +55ºC |
Temperature compensation | Advanced bidirectional |
RH | From 5% to 95% without condensation |
PIR white light immunity | 10,000 lux (typical) |
Dimensions | 116 x 70 x 43 mm (H x W x D) |
Weight | 135g |
Certifications (DT8016AF4) | EN50131-2-4:2008 Grade 3 Class II** |
Certifications (DT8016MF4) | EN50131-2-4:2008 Grade 2 Class II |