Especificaciones Técnicas del Transmodulador DVB-S/S2 a COFDM MTI-800 de IKUSI
MODEL | MTI-800 | |
REF. | 4099 | |
Reception | DVB-S ; DVB-S2 | |
Transport Stream Processing (TS) | yes | |
In | ||
Standar | EN 300 421 | |
Input frequency band | MHz | 950 - 2150 |
Entry level | dBμV |
44 ... 84 (DVB-S) 39 ... 84 (DVB-S2) |
Input loop gain | dB | 0 (±1) |
CAF margin | MHz | ±5 |
Entry regime | MS/s |
10 ... 30 (DVB-S2) 2 ... 45 (DVB-S) |
Processing | ||
Data processing | EN 300 744 | |
Operation modes | 2K ,, 4K (DVB-H) ,, 8K | |
Constellation | QPSK ,, 16QAM ,, 64QAM | |
Code rate | 1/2 ,, 2/3 ,, 3/4 ,, 5/6 ,, 7/8 | |
Guard interval | 1/4 ,, 1/8 ,, 1/16 ,, 1/32 | |
iIterlaced in-depth (sólo en DVB-H) | Aplicable (en modos 2K y 4K) | |
Modulation error rate (MER) | dB | > 38 (típ.) |
Out | ||
Selectable output channel, included between: | MHz | 47 - 862 |
Bandwidth | MHz | 5 (DVB-H) ,, 6 ,, 7 ,, 8 |
Adjustable output level | dBμV | 65 a 80 |
frequency stability | ppm | ≤ ±30 |
Output loop step attenuation | dB | 1,1 |
spurious in band | dBc | < -50 |
broadband noise (∆B=5 MHz) | dBc | < -75 |
General | ||
supply voltage | VDC | +12 |
Consumption | mA | 730 |
Operating temperature | ̊C | 0 ... +45 |
Input RF loop connector | (2x) F hembra | |
Output RF loop connector | (2x) F hembra | |
Power connectors and telefeeding amplify mast | hembrilla “banana” | |
Programming interface | RS-232 / DB-9 | |
Conector Bus IKUSUP | (2x) base 4 pines | |
Dimensions | mm | 230 x 195 x 32 |