Technical Specifications of the Duox Kit for 4 homes with Video Intercom

The Fermax 4-home kit has everything necessary to carry out our video intercom installation in a 4-home building.

What does this Fermax kit include?

• Connect entrance panel with four buttons.
• Embedding box.
• 4 9445 monitors.
• 4800 feeder.
• Feeder + Filter 4825.
• 2 Duox 3255 line adapters.

What technical characteristics does the 9445 monitor have?

GENERAL CHARACTERISTICS
Technology: DUOX PLUS (full digital 2 non-polarized wires)
Audio/Video System: Color Audio/Video
Mounting: Surface mounting (request connector ref. 9447 separately)
Desktop support: Yes (ref. 9410)
Earpiece with magnet to facilitate hanging: Yes
Version with inductive loop available: Yes (Exchanging headset for ref. 3443 or request monitor ref. 9455 that already includes the inductive loop)
Screen dimensions: 4.3” (16:9 Widescreen)
Screen resolution (H x V): 480 x 272
Product color: Matte white
Total buttons: 4
Type of buttons: Mechanical (silicone)
Number of LEDs for light signals: 1 (red 3 states: always active, slow/fast flashing)

TERMINAL ADDRESS PROGRAMMING
From the terminal: From OSD menu
From the panel or concierge: Yes
From the panel through the doorbell (without entering the home): Yes

FUNCTIONS
Automatic photo capture (PHOTOCALLER): Yes (1 photo/call, up to 150 photos, 368 x 288 pixels). This feature can be enabled by the user. Disabled by default.
Call to concierge center: Yes (from door opening button)
Auto-on: Yes (up to 3 plates/cameras)
On-Screen OSD Menu: Yes
Button for additional function F1: Yes (sending negative and/or command)
Additional function F2 from screen: Yes (command only, no negative)
Doorbell with melody differentiated from the plate: Yes
Connection for device add. (call extension, lights and bells activation, etc.): Yes (ref. 2040, ref. 2438, ref. 3267)
Additional terminals with the same address: Yes, maximum 2 additional terminals (additional power supply may be required)
Doormatic (opening function for professionals): No

SETTINGS
Date and time: Yes
Melody selection: Yes (5). Configurable for Block Plate 0, Block Plate 1, General Entry Plate 0 and Concierge.
Call volume regulation: Yes (10 levels per OSD menu)
Do not disturb function: Yes (via OSD menu) + Red LED signaling
Conversation audio volume regulation: Yes (10 levels per OSD menu)
Brightness, contrast and color regulation: Yes (via OSD menu)

TECHNICAL CHARACTERISTICS
Product dimensions (Width x Height x Depth mm): 200 x 200 x 23 (44 including handset)
Time to answer or open from when the call occurs: 30 s.
Talk time: 90s.
Conversation privacy: Yes
Supply voltage: 18-24 Vdc
Maximum consumption (W): 5.2 W
Standby consumption (W): 0.8 W
Operating temperature (ºC, ºF); Humidity: [-5ºC, +40ºC][23ºF, 106ºF]; [0%, 90%]
Line adapter included in the monitor: Yes (A, C, default position OFF)
Terminals: Bin, Bin, Bout, Bout, -, A+, F1, T

What technical specifications does the Fermax 73910 Video Module have?

• Sensor: 1/3" color CMOS.
• Effective pixels >, 340K. (camera captures 720x480)
• Minimum external lighting: 0 lux. Since it has LEDs, no additional lighting is required.
• S/N >,45dB.
• Frame rate 25 fps.
• Resolution>, 368x288 pixels.
• Video Codec: H264 Highline Profile
• Auto iris.
• Auto BLC.
• Viewing angle 100º horizontal, 80º vertical.
• Fisheye correction.
• Color night vision through white LEDs.
• Digital zoom Pan & Tilt.
• Module Measurement.
  
  • Module W: 105.2x95 mm (width-height).
• Power: 18-24 Vdc
• Consumption:
  
  • At rest: 240 mA.
  • Active audio: 560 mA.
• IPK-437
• Audio power in the home-street direction: 2W
• Audio power in the street-home direction: 0.15W
• Adjustable volume in both directions
• Operating temperature: -25 to 70 ºC