The LOCOM2 access point of Ubiquiti is a CPE that works at 2.4GHz and has a power of 8DBi.
What technical characteristics does the LOCOM2 access point have?
-
NanoStation Loco M2 is a compact outdoor device, it includes a dual polarity MIMO antenna for the 2.4 GHz band.
- The actual transfer speed of the equipment is up to 150 Mbps.
- Thanks to TDMA technology, Time Division Multiplexing allows you to connect more than 300 clients to the team.
- This model has a low latency. Compared to the Nanostation M predecessors, the Nano Loco M2 has a processor with a higher clock frequency of 400 MHz and more memory.
- Very simple and transparent administration website
- Examples of possible configurations:
- AP, client or WDS mode
- Traffic Shaping
- QoS
- Transparent bridge or routing between WAN and LAN, with NAT or without NAT
- Specific LED to indicate the strength of the signal
- Output power 23 dBm
- The equipment supports IPv6 in bridge mode and WDS.
- The equipment includes the 24V PoE injector necessary for its power supply.
- Another advantage is that it supports PoE on the secondary ethernet port, which allows it to power another device. This feature can be disabled through software.
- Important information about compatibility:
- This device uses the new AirOS V firmware version. For this reason, the device may not be fully compatible with other radio devices.
- The AirOS system is continuously improving, so it is recommended to always update the firmware to the latest version.
- Specifications Ubiquiti Loco M2
- Ports and Interfaces
- Ethernet LAN (RJ-45) number of ports: 1
- Weight and measurements
- Width: 80 mm
- Depth: 31 mm
- Height: 163 mm
- Weight: 180 g
- Energy control
- Energy consumption: 5.5 W
- Input voltage: 24
- Input current: 0.5
- Power over Ethernet (PoE): Yes
- Environmental conditions
- Relative humidity range for operation: 5 - 95%
- Operating temperature range: -30 - 75 ° C
- Antenna
- Antenna gain (max): 8 dBi
- Design
- Internal: No
- Color of product: White
- LED indicators: Yes
- Housing material: Plastic
- Performance
- Transfer rate (max): 150 Mbit / s
- 2.4 GHz: Yes
- Network standards: IEEE 802.3, IEEE 802.3u
- Ethernet LAN, data transfer speed: 10,100 Mbit / s
- Wi-Fi data transfer speed (max): 150 Mbit / s
- Band frequency: 2.412-2.462
- Flash Memory: 8 MB
- Internal memory: 32 MB
- Maximum range outdoors: 10000 m
- Built-in processor: Atheros MIPS 24KC 400 MHz
- Certification: RoHS