The box 8948 of Fermax is a box for embedding a street panel of doormen, video intercoms and keyboards Fermax S1, that is, all those plates whose measurements are 130X128mm.
What technical characteristics does the 8948 box have?
- To install a plate it is necessary to place a box on the wall.
- The flush-mounted boxes are made of plastic.
- They have folding hinges in any direction, which allow to hold the plate while wiring is done.
- They have circular marks split into the bottom of the box, which are punctured with a slight blow or pressure, thus allowing the passage of the cables.
- In the case that several plates are combined, always of the same series, it is necessary to use a set of separators for a perfect coupling.
- One set is required for each additional plate that is installed between the flush-mounted boxes.
What is a flush-mounted box used for?
A flush-mounted box, such as Fermax's 8948 caka, is used to install an S1-size Fermax street entrance panel in the wall.