The transmodulator receives an SAT transponder in the DVBS (QPSK) or DVBS2 (QPSK / 8PSK) modulation formats and demodulates it by obtaining an MPEG-2 transport packet.
What technical characteristics does the transmodulator 563101 have?
- Total or selective elimination of the services present in the received transponder, so that they are not detected (and memorized) by the receivers (STB)
- Editable TS_ID, which facilitates the detection of programs / services in the receiver (STB) because they perform the scanning of channels based on this identifier
- LCN (Logical Channel Number), allows to assign to the services present in the output an LCN, which facilitates the ordering of the channels in the receivers (STB)
- It provides information about the occupation of each service and the total occupation of the output, which allows to optimize the distributed services
- Remotely controllable with the CDC (Head Control)
- Device monitoring LEDs and signal status
- S_ID editable, to avoid retuning of the receivers (STB) of an installation when the services of the output multiplex are changed
- Network_ID, Original Network_ID and Cell_ID editable, allows you to control network identifiers
- Through the CI interface and the corresponding CAM module, the coded satellite channels are transformed into free DTT services. Depending on the CAM used (standard / professional), one or more services can be opened for viewing in open