H30 evolution 593505 meter for DVB-S/S2/T/T2/C signals + WiFi and IPTV analyzer + HEVC display + Coaxial extender + Transport case.
What functions does the Televes H30 Evolution FULL Version field meter offer?
IPTV and Services Analyzer
- Info of IPTV services and also RF
- It allows to demodulate and analyze Unicast and Multicast IPTV flows, showing the video and indicating the total Bitrates and of each service. It also presents all the information of each of the services, such as SID, VPID, AID, video profile, or bit rate for audio and video.
- In addition, this option completes the measurements in RF since for this type of signal all this information is also offered by service.
- In IPTV signals, even other protocol-specific measures (UDP / RTP) are analyzed, such as UDP format, Media Loss Rate, Lost IP frames.
WiFi analyzer
- All bands (2.4 and 5GHz)
- With this functionality it is possible to carry out a complete analysis of the Wi-Fi band to automatically detect all networks. Each one is identified by its name and the signal strength of the access point is also presented. Two display modes are offered, at the user's choice. The "list" mode offers a list of the networks detected with their data and power, while the "map" mode places them on an axis map: power vs. frequency.
HEVC display
- On your mobile device
- This functionality supports the new HEVC H.265 compression format and allows video signals with a maximum resolution of Full HD (1920 x 1080) to be viewed on your mobile device. The display is always from the smartphone, tablet or PC (multiscreen mode) as long as your hardware is H.265 compatible
Multiscreen and remote control
- Controllable from any Android or iOS device or a PC
- The H30Evolution multiscreen system allows you to display the meter’s screen on your smartphone or tablet to wirelessly control the equipment or just for the sake of working with a larger screen.
- The installer may wirelessly access the equipment at any time from anywhere in the installation (depending on the local network connection range), with the convenience of always using his/her own device.
- Simply install the H30Evolution App on your device and connect it to the WiFi network generated by the meter (AP mode).
Multi Standard
- Fully configurable equipment to meet your needs
- H30Evolution is fully prepared to meet the specific needs of each individual user. It is a multi-standard equipment, ready to take measurements on the satellite band, but also on the terrestrial band channels. In order to meet the changing needs of individual users, the equipment allows them to easily add new options, with no need to send the meter back to the factory.
Accuracy and Speed
- Real-time digital processing
- Designed to instantly obtain all the information about the signal in real time, it is a true milestone in field work. H30Evolution provides the required accuracy and speed to detect minor transient radiation, or spurious signals that could affect the system during signal reception.
Pass/Fail Indicators
- Easy decision-making
- Reduce installation mistakes with the on-screen Pass/Fail indicators, a graphical tool that helps and speeds up the interpretation of measurement results. Different thresholds are available depending on the network area to be analysed: headend, multi-band amplifiers, bridging connection, connection records, user home, etc. Besides the pre-set values, you will be able to customize your own threshold values.
System Scan
- Monitored installation
- Scan each existing analogue and digital channel in real time to determine the overall system frequency response. This function leverages the location-based thresholds to clearly show whether the signal levels meet the cable systems’ specifications with green, yellow and red bars. This feature provides an easy-to-understand, real-time view of the system, including the BER and MER values of the selected channel.
Spectrum Analyser
- From 5MHz to "full span“
- H30Evolution spectrum analyser provides a value range of 5, 10, 20, 50, 100, 200, 500 MHz and Full, as well as a reference level auto-adjust feature. Real-time processing speeds ensure the capture of any signal incidents. You will be surprised by the accuracy and the level of detail provided by this ultra-portable pocket spectrum analyser. The ultimate tool for identifying and localising noise, interference, radiation, and any other signals that may be affecting the quality of the television signal distribution service.
Guided satellite pointing
- LNB self-configuration
- This functionality speeds up the dish pointing work. The meter has a typical satellite and a stable transponder according to the regional zone previouly set, and it is self-configurated for the LNB connection. In addition, a sound indicator can be activated in order to audibly guide the user in the satellite dish pointing.
- The reference satellite can be manually changed and start a new pointing.
Constellation Diagram
- Fine-tune your digitals
- Constellation analysis is essential for determining the quality of digital signals. Constellation diagrams help detecting noise, jitter, interference and signal saturation, and all the variables that could impact signal quality, eventually leading to service suspension. By visually inspecting the size and shape of the dots in the constellation matrix, the technician will be able to easily identify the nature of the problem
Echo
- Optimal signal reception
- In terms of terrestial signal reception, controlling the absence of any echoes that could jeopardize reception is crucial. H30Evolution displays the echoes of the received signal, allowing the installer to minimize them for optimal signal reception.
What technical specifications does the Televes H30 Evolution FULL Version field meter have?
H30EVOLUTION | |
Mechanical Specifications | |
Screen | 2.8” TFT 400 x 240 full color |
Weight | 510 g. |
Dimensions | 175x100x52 mm / 6,9x3,9x2 (HxWxD) |
AC Adaptor | Input: 100-240V~ 50-60Hz Output: 12VDC, 2A |
Battery | Li-ion (7,2VDC, 2300mAh) |
Baterry range | >4hours without LNB powering |
Interfaces | Bluetooth, Wi-Fi 2.4GHz (5GHz upgrade 593250), Ethernet 1Gb USB 2.0 for Data log download and software upgrades |
Storage capacity | 400 MB (internal) for measurements |
Resilience | It withstands drops from 1 m (3.2 ft) onto concrete on all sides |
Impedance | F-type connector - 75 Ohm |
Especificaciones Técnicas | |||||||
593503 | 593501 | 593502 | 593504 | 593505 | |||
---|---|---|---|---|---|---|---|
Frecuencia | |||||||
Rango | Terrestre: 50 - 880 MHz / Satélite: 950 - 2200 MHz / Wideband: 250 - 2350MHz | ||||||
Resolución | 125 kHz | ||||||
Sintonía | Frecuencia o canal | ||||||
Analizador de espectro | |||||||
Span | 5, 10, 20, 50, 100, 200, 500 MHz y Full | ||||||
Escala | 5 y 10 dB/div | ||||||
Nivel de referencia automático y manual | ✓ | ||||||
Medidas DVB-S [Modulación: QPSK] | |||||||
Imagen | ✓ | ✓ | ✓ | ✓ | ✓ | ||
Potencia | De 45 a 110 dBμV | ✓ | ✓ | ✓ | ✓ | ✓ | |
CBER | 9.9E-2 – 1.0E-6 | ✓ | ✓ | ✓ | ✓ | ✓ | |
VBER | 1.0E-4 – 1.0E-8 | ✓ | ✓ | ✓ | ✓ | ✓ | |
MER | Hasta 20dB | ✓ | ✓ | ✓ | ✓ | ✓ | |
C/N | Automático | ✓ | ✓ | ✓ | ✓ | ✓ | |
Constelación | ✓ | ✓ | ✓ | ✓ | ✓ | ||
SCR | EN 50494 | ✓ | |||||
dCSS | EN 50607 | Opc. 593234* | |||||
Medidas DVB-S2 [Modulaciones: QPSK, 8PSK] | |||||||
Imagen | ✓ | ✓ | ✓ | ✓ | ✓ | ||
Potencia | De 45 a 110 dBμV | ✓ | ✓ | ✓ | ✓ | ✓ | |
Link Margin | Hasta 10 dB | ✓ | ✓ | ✓ | ✓ | ✓ | |
MER | Hasta 20 dB | ✓ | ✓ | ✓ | ✓ | ✓ | |
LDPCBER | 9.9E-2 – 1.0E-6 | ✓ | ✓ | ✓ | ✓ | ✓ | |
BCHBER | 9.9E-2 – 1.0E-8 | ✓ | ✓ | ✓ | ✓ | ✓ | |
Constelación | ✓ | ✓ | ✓ | ✓ | ✓ | ||
SCR | EN 50494 | ✓ | |||||
dCSS | EN 50607 | Opc. 593234* | |||||
Medidas Digitales DVB-T [Modulaciones: COFDM (QPSK, 16QAM, 64QAM)] | |||||||
Imagen | Opc. 593231 | ✓ | ✓ | ✓ | ✓ | ||
Potencia | De 45 a 110 dBμV | Opc. 593231 | ✓ | ✓ | ✓ | ✓ | |
De 45 a 120 dBμV | Opc. 593231 + Opc. 593235* | ✓ | Opc. 593235* | ✓ | Opc.593235* | ✓ | Opc.593235* | ✓ | Opc.593235* | ||
CBER | 9.9E-2 – 1.0E-6 | Opc. 593231 | ✓ | ✓ | ✓ | ✓ | |
VBER | 1.0E-3 – 1.0E-8 | ✓ | ✓ | ✓ | ✓ | ||
MER | Hasta 35 dB | ✓ | ✓ | ✓ | ✓ | ||
C/N | Automático | ✓ | ✓ | ✓ | ✓ | ||
Ecos | ✓ | ✓ | ✓ | ✓ | |||
Constelación | ✓ | ✓ | ✓ | ✓ | |||
Medidas Digitales DVB-T2 [Modulaciones: COFDM ( QPSK, 16QAM, 64QAM y 256 QAM)] | |||||||
Imagen | Opc. 593231 + Opc. 593232 | Opc. 593232 | ✓ | ✓ | ✓ | ||
Potencia | De 45 a 110 dBμV | Opc. 593231 + Opc. 593232 | Opc. 593232 | ✓ | ✓ | ✓ | |
De 45 a 120 dBμV | Opc. 593231 + Opc. 593232 + Opc. 593235* | Opc. 593232 + Opc. 593235* | Opc. 593235* | Opc. 593235* | Opc. 593235* | ||
LDPCBER | 9.9E-2 – 1.0E-6 | Opc. 593231 + Opc. 593232 | Opc. 593232 | ✓ | ✓ | ✓ | |
BCHBER | 1.0E-3 – 1.0E-8 | ✓ | ✓ | ✓ | |||
Link Margin | Hasta 30 dB | ✓ | ✓ | ✓ | |||
MER | Hasta 35 dB | ✓ | ✓ | ✓ | |||
C/N | Automático | ✓ | ✓ | ✓ | |||
Ecos | ✓ | ✓ | ✓ | ||||
Constelación | ✓ | ✓ | ✓ | ||||
Medidas Digitales DVB-C [Modulaciones: 16QAM, 32QAM, 64QAM, 128QAM y 256 QAM] | |||||||
Imagen | ✓ | Opc. 593233 | Opc. 593233 | ✓ | ✓ | ||
Potencia | De 45 a 110 dBμV | ✓ | Opc. 593233 | Opc. 593233 | ✓ | ✓ | |
De 45 a 120 dBμV | Opc. 593235* | Opc. 593233 + Opc. 593235* | Opc. 593233 + Opc. 593235* | Opc. 593235* | Opc. 593235* | ||
CBER | 1.E-2 – 1.0E-8 | ✓ | Opc. 593233 | Opc. 593233 | ✓ | ✓ | |
MER | Hasta 38 | ✓ | ✓ | ✓ | |||
C/N | Automático | ✓ | ✓ | ✓ | |||
Medidas Analógicas | |||||||
Nivel | 25 y 125 dBμV | ✓ | ✓ | ✓ | ✓ | ✓ | |
V/A | ✓ | ✓ | ✓ | ✓ | ✓ | ||
C/N | ✓ | ✓ | ✓ | ✓ | ✓ | ||
Medidas y funciones | |||||||
Analizador WiFi | Opc. 593250 | Opc. 593250 | Opc. 593250 | Opc. 593250 | ✓ | ||
Analizador IPTV | Opc. 593251 | Opc. 593251 | Opc. 593251 | Opc. 593251 | ✓ | ||
Planes terrestre | CCIR, CCIR + LTE, OIRT, KBW, FCC, DAB, SIM | ||||||
Satélites | 68E INTEL C, 68E INTEL, 42E TURK, 39E HELLAS, 33E EUTEL, 28E EUTEL, 28E ASTRA, 26E BADR, 25E EUTEL, 23E ASTRA, 21EEUTEL, 19E ASTRA, 16E EUTEL, 13E HOTB, 10E EUTEL C, 10 EUTEL, 9E EUTEL, 7E EUTEL, 4E ASTRA, 1W THOR5, 1W THOR6,5W EUTELC, 5W EUTEL, 7W NILE, 30W HISPA, 48W AMZC, 48W AMAZ, SIM | ||||||
Unidades | dBμV, dBmV, dBm | ||||||
Alimentación LNB | 13, 18 Vdc | ||||||
Tono LNB | 22 kHz |