Technical Specifications of the Mobile Repeater Kit 800/900MHz EGSM 2G/3G/4G Automatic/Manual Adjustment
Maximum Output Power | 15 dbm | 20 dBm | |
Spec. electrical | Upload (Mhz) | Download(MHz) | |
Frequency range | EGSM | 880-915 | 925-960 |
800 | 832-862 | 791-821 | |
Ganancia Máxima | 75dB | 70dB | |
MCG (Manual dimming with buttons) | Ø 31dB/ 1dB per step | ||
AGC (automatic gain control) | Ø 25 dB,auto disconnection from 25dB | ||
Emission of spurious | 9KHz-1GHz | < -36dBm | |
1GHz-12.75GHz | < -30dBm | ||
Frequency Stability | < 0.01 ppm | ||
Noise Figure | < 6dB | ||
VSWR | < 2.0 | ||
Group Delay | < 1 µs | ||
smart features | Standard. LED ON/OFF | ||
AGC alarm | Red alarm when AGC control over 10dB | ||
output signal power | Output signal power is displayed with numbers |
||
Alarm LED | standar | ||
power led (Power) | power indicator | ||
ALC led | orange, ALC 1-5dB, red ALC 15dB-20dB | ||
Red LED turns off after 5 seconds | |||
Mechanical Specifications | standar | ||
Input/Output Ports | N female | ||
Impedance | 50 Ohms | ||
operating temperature | -10°C - +50°C | ||
Environmental conditions | IP40 | ||
Dimensions | 128x170x65 mm | ||
Weight | <2,5 Kg | ||
Feeding | input 100-240Vca; output 9Vcc/5A |