The Fermax 3305 monitor is a 3.5" color VDS video intercom from the LOFT series
What technical characteristics does the Fermax 3305 Monitor have?
- 3.5" TFT screen
- Resolution: 480 (H) x 234 (V) lines
- The terminal incorporates a magnet in the area of the handset that allows the arm to be well hung and fixed to the base
- This prevents the arm from falling during its hanging, damaging the wall and also prevents it from causing damage to the installation due to being poorly hung
- Dimensions: 220x203x60 mm (height-width-depth)
- Power supply: 18 Vdc
- Door opener button and call to concierge
- Auto power button for main and sub camera activation (sequentially)
- Call volume regulation
- Regulation of color, brightness and contrast
- On / off control
- Doorbell: for direct connection of the house call button to the monitor / telephone
- Two selectable ringtones.
- It has 2 buttons for additional functions (without assigned function)
- Private communication. Conversation secret
- Consumption:
- Standby: 8 mA
- Active: 400 mA
What functions does the Fermax 3305 Monitor offer?
- VDS system
- Simplified installation door entry and video door entry system that does not use call wires per dwelling
- The call is made by transmitting a digital call code generated by the VDS amplifier
- In new construction, the installation can be carried out with the following type of wiring:
- UTP CAT5
- 5 Threads
- 3 wires + Coaxial (video)
- It allows managing buildings with up to 199 homes, 2 entrance entrances and a concierge center
- Maximum distance from first access to last home: 200 m
- In replacement, it is possible to change from analog to video door entry phone taking advantage of the existing wiring. The capacity and distance of the system will depend on the installation wiring
- The VDS amplifier includes a voice synthesizer as standard. When the opener is operated, a message is issued: "door open, close after entering"
- The residential terminals require a simple programming that is carried out from the entrance panel. Through this programming, each terminal (telephone or monitor) is assigned a calling code
- Communication is private