Professional Field Meter for TV, SAT, CATV and FM Radio
What technical specifications does the ROVER TAB 5 ULTRA Field Meter have?
SPECIAL FUNCTIONS
- Exclusive patented ROVER AUTODISCOVERY system: auto-matically detects and selects analog and digital COFDM/QAM TV signals in both measurement and spectrum mode
- Automatically identifies all the signals with digital modulation SAT, TV and CATV
- Automatic Assistant: Signal Quality analysis, Channel Scan memorization
- Barscan TV & CATV function from 10 to 100 channels on one screen
- Buzzer & Noise Margin real time graph for digital signals microinterruptions
- Reflectometric measurements APP
- Optical Input (opt.)
- WI-FI analyzer (opt.)
- HEVC H265 decoder (opt.)
- SATELITE: DiSEqC, SCR, dCSS & Motorized antenna commands, SAT FINDER & SAT EXPERT
- Custom Channel Plans: 25 (199 ch. per plan), Programmable TV, SAT (or combined TV/SAT) by PC or Local Keyboard
- Loggers: TV, SAT & combined with stop & go function
- SAT Memory Plan: More than 2.000 transponders prememorized for world wide Satellite
- Free S.M.A.R.T. PC interface program and FW upgrades
- OPTIONS*: Check the Cross reference
SPECIFICATIONS: MEASUREMENTS, SPECTRUM ANALYSIS & PICTURES
- Frequency Range: TV, CATV & Radio: 30-1.000 MHz; SAT: 700–2.700 MHz
- Frequency Resolution: TV & CATV 25 KHz; SAT: 5 MHz
- Power range Meas.: TV 35 to 115 dBμV, SAT 5 to 105 dBμV
- Digital Meas: Digital Power, MER (36 to 40 dB max depending on modulation), BER, PER, LDPC, BCH, Noise Margin, MER versus CARRIER
- Measurement Resolution: 0.1 dB
- Level Measurement Accuracy: 1 dB typ. (2 dB max.)
- Resolution Filter Bandwidth: TV & CATV: 100 KHz @ -3 dB; SAT: 5 MHz @ -3 dB
- Constellation: for TV/CATV and SAT signals
- Spectrum: Fast spectrum, Max Hold and spectrum memorization with real time compare function
- Net-id on board: Net-id, NID, TSID, LCN, SAT Orbit Position
- Echoes, Pre-echoes, Micro-echoes: Representation in real Time
- Quality: Digital Auto quality Test: PASS-MARGINAL-FAIL
- Digital Pictures: MPEG2-4 SD & HD, HEVC (opt.) pictures with Program List, Audio Video PIDs, LCN, Video bit Rate all on one screen
OPTICAL MEASUREMENTS
- SC input connector
- Automatic loss calculation
- Wavelengths (nm): 1310, 1490 & 1550
- Range: -25 to +6 dBm
- Resolution: 0.1 dB
- Accuracy: +/- 0.5 dB
- Optical to RF conversion
COMM. PORTS AND OUTPUTS
- RF Input : 75 ohm (interchangeable “F”)
- USB 2.0: Type B (PC Interface)
- Audio: AAC supplied, DOLBY (opt.)
- Video: Composite Video input
GENERAL SPECIFICATIONS
- 5” TFT TOUCH display: 16:9 high resolution and high brightness
- Power Supply: Built in LiPo battery with 2 to 4 hours duration (depending on the function) & Battery Test function
- DC voltage at RF input: 5 – 12 – 18 – 24 VDC, DiSEqC, SCR & dCSS commands
- PC Interface: USB-B
- Front-Panel: Alpha numeric keypad
- Power Save: TFT backlight timer, brightness adj
- PC Management: S.M.A.R.T. software
- Weight: only 1,4 Kg with batteries
- Size: H 13,0 x W 25,5 x D 4 cm
- Housing: Aluminium and Steel and padded bag
OPTIONS
- Optic Ingress
- Decoding HEVC H265 images
- WI-FI analyzer
- Dolby Audio AC3 DD+
- Elite bag with extra padding