Technical Specifications of the DSX-602 CAT6A Cable Network Certifier (Includes 2 Channel Adapters) from Televes
Test standards | |
TIA | Category 3, 5, 5e, 6, 6A according to TIA 568-C.2 or TIA-1005 |
ISO/IEC | Certification of Classes C and D, E, EA according to ISO/IEC 11801:2002 standards and their corresponding amendments |
IEEE 802,3 | 10BASE-T, 100BASE-TX, 1000BASE-T, 10GBASE-T |
UNE/EN | Certification of Classes C and D, E, EA, according to UNE-EN 50173-1:2011 (ICT2) standards |
General specifications | |
Auto check speed | Category 5e or 6/Class D or E full two-way self-test: 9 seconds |
Complete Category 6A/Class EA Bidirectional Autotest: 10 seconds | |
Supported test parameters | Wiring map, length, propagation delay, delay difference, DC loop resistance, insertion loss (attenuation), Return Loss (RL), Near End Crosstalk (NEXT), ratio Attenuation-to-crosstalk Ratio (ACR-N), ACR-F (ELFEXT), Power Sum ACR-F (PS ELFEXT), Power Sum NEXT, Power Sum ACR-N |
(the standard determines the parameters and the frequency range to be considered) | |
Maximum frequency | 500MHz |
Storing Test Results | 12000 (Cat-6A with graphics) |
Screen | 5.7” LCD screen with projected capacitive touch screen |
Battery | Lithium-ion (7.2V) |
Battery duration | 8 hours on average |
Battery Charging Time | 4 hours (below 40°C with tester off) |
Operating temperature | 0°C to 45°C (32°F to 113°F) |
Storage temperature | -20°C to +60°C (-4°F to +140°F) |
Relative operating humidity | 32°F to 95°F (0°C to 35°C): 0% to 90% |
(% RH without condensation) | 95°F to 113°F (35°C to 45°C): 0% to 70% |
Vibration | Random, 2g, 5Hz to 500Hz |
Bang | 1m drop tested with and without module and adapter included |
Security | CSA 22.2 No. 61010, IEC 61010-1 3rd Edition |
Altitude | 4,000 m (13,123 ft) |
3,200 m (10,500 ft) with AC adapter | |
EMC | EN 61326-1: Portable |