Power supply: | Battery or 12–24V DC supply (LPS or NEC class 2) |
Battery type: | CR123A/CR17345 battery, 3.0V DC |
Power consumption (at VDC operation) | 0.4W |
Output terminals maximum current carrying capacity: (ALARM NC, TAMP NC) |
25mA |
Maximum voltage at output terminals: (SMOKE NC, TAMP NC) |
24V DC / 20V AC |
EU standards compliance: | RED 2014/53/EU RoHS 2011/65/EU |
Radio protocol: | Z-Wave Z-Wave+ (firmware 3.2 or higher) |
Radio frequency: | 868.4 or 869.8 MHz EU; 908.4 or 916.0 MHz US; 921.4 or 919.8 MHz ANZ; 869.0 MHz RU; |
Radio transmit power: | up to -5 dBm (EIRP) |
Range: | up to 50 m outdoors up to 30 m indoors up to 40 m indoors (firmware 3.2 or higher) (depending on terrain and building structure) |
Operational temperature: | 0°C to 40°C – battery powering mode -20°C to 70°C – VDC powering mode |
Measured temperature range: | -20°C to 100°C |
Temperature measuring accuracy: | 0.5°C (within 0 – 40°C range) |
Dimensions (diameter x height): | 72 x 28mm |
Technical Specifications of the Wireless Z-Wave Fibaro FGFS-101 Flood Sensor
Fibaro's flood sensor is sinking proof, which means that it travels over the surface of the water and continues to send an alarm signal in the event of a substantial flood of water.
What technical specifications does the Fibaro FGFS-101 Flood Sensor have?
- Compatible with any Z-Wave controller.
- Compatible with any Z-Wave or Z-Wave + controller (firmware 3.2 or higher).
- Supports protected mode (Z-Wave network security mode) with AES-128 encryption (firmware 3.2 or higher).
- It can be connected to any alarm system (potential-free output terminal).
- Extremely easy installation - simply place it on a flood prone surface.
- Can be installed anywhere - Flood sensor contacts are extended with a cable.
- It works with battery or VDC. When connected to an external 12 / 24V DC power source, the battery serves as an emergency power source.
- Protection against theft - the inclination is reported to the Z-Wave network or to the main controller of the alarm system.
- Two operating modes: flood / temperature sensor or just one temperature sensor.
- The alarm is signaled by sound, visual indicator (LED) and Z-Wave.