Technical Specifications of the Ikusi SAE-912 Simple Extension Amplifier
Features:
- Distribution of terrestrial TV signals, satellite and interactive multimedia FI.
- RF input 1 - 1 output RF.
- Independent amplification routes terrestrial and satellite, with push-pull amplification technology in the earth. Via passive or active return, with respective partitions 35/45 MHz or 65/86 MHz. - Dim settings and equalization of the TV and IF signals potentiometer. In model with active return path, selection of attenuation of the return signal by inserting small jumpers supplied.
- Doors test 75 ω Direct output signals (TV + FI) and return.
- Power AC 50/60 Hz Pilot indicator.. Insertable cable network based connection type C8, 2 pins.
- zamak box with protective cap adjustment items. F. Wall mounting connectors.
- Interior installation. Provision for earthing.
Model |
SAE-912 |
||||
Ref. |
3500 |
||||
Mains powering mode |
Red Mains Secteur |
||||
Bandwidith |
Terr (TV) |
MHz |
45 - 862 |
||
RF Inputs |
|
1 |
|||
RF Outputs |
|
1 |
|||
|
Nominal gain |
dB |
TERR |
35 |
|
SAT |
40 |
||||
Terr and Sat path |
Response flatness |
dB |
TERR |
±1,5 |
|
SAT |
±2 |
||||
Variable interstage attenuator |
dB |
TERR |
0 - 18 |
||
SAT |
0 - 18 |
||||
Slope control range |
dB |
TERR |
0 - 18 |
||
SAT |
0 - 12 |
||||
Noise figure |
dB |
TERR |
≤ 8 |
||
SAT |
≤ 6 |
||||
RF output level |
dBµV |
TERR |
118 1 / 115 2 / 103 3 |
||
SAT |
120 4 |
||||
Output test |
dB |
TERR |
-20 ±1,5 |
||
SAT |
-20 ±1,5 |
||||
Return path |
Ganancia nominal Nominal gain Gain nominal |
dB |
|
-2,5 |
|
Selectable attenuation |
dB |
|
|||
Noise figure |
dB |
||||
RF output level |
dBµV |
||||
Output test |
dB |
-20 ±1 |
|||
General |
Operating temperature |
ºC |
|
-10 ... +55 |
|
(50/60 Hz) Supply voltage |
VAC |
230 - 240 |
|||
Consumption |
W |
8,5 |
|||
Dimensions |
mm |
222 x 140 x 44 |