SC - APC connector for fiber optic brand Televes. To insert the fiber into the connector you must follow the following steps:
- Insert the fiber through the threaded plastic bushing and rubber sleeve.
- Strip the fiber (leaving a length of 20mm for the diameter of 250 microns and 10mm for the diameter of 125 microns).
- Insert the fiber into the connector housing until it reaches the bottom.
- Close the connector tab by trapping the rubber sleeve, and therefore the fiber.
- Move the slide switch to fix the fiber.
- Screw the plastic bushing. Insert the rectangular green cap, until it is anchored.
Applications:
- ODF (Optical Distribution Frame)
- ONT (Optical Network Unit)
- FTTH (Fiber to the Home)
- Cable TV Network