Technical Specifications of the UTP CAT6 Indoor White Cu Cca LSZH Cable in a 305-meter Keynet Coil
Reference | ľD-625AUT-C3-LBR-W | |||||||||
Setting up | Cat 6A U/UTP | |||||||||
Conductor | AWG | 23 AWG / 0,560 ± 0,01 | ||||||||
Material | BC / Cobre puro | |||||||||
Isolation | Material | HDPE | ||||||||
Diameter | mm | 1,01 ± 0,02 | ||||||||
External cover | Thickness | mm | 0,7 | |||||||
External diameter | mm | 7,1 ± 0,5 | ||||||||
Material | LSZH | |||||||||
CPR | Cca-s1a,d1,a1 | |||||||||
Coloí | Blanco RAL 9010 | |||||||||
Cross-piece | Sí (HDPE) | |||||||||
Torn Thread | Sí | |||||||||
Frequency range | MHz | 1 - 550 | ||||||||
Impedance | Ω | 100 ± 15 | ||||||||
Mutual nominal capacity | pF/100m | 5600 | ||||||||
Maximum unbalanced capacity | pF/100m | ≤ 160 | ||||||||
Maximum continuous current resistance | Ω/100m | ≤ 9,5 | ||||||||
Nominal propagation speed NVP | % v.l. | 68 | ||||||||
Differential delay (skew) | ns/100m | ≤ 45 | ||||||||
Maximum unbalanced continuous current resistance | ≤ 2,5% | |||||||||
PoE Compliance | IEEC802.3bt PoE type 4 (90 Watts) | |||||||||
Tensile strength before aging | Mpa | ≥ 13,5 | ||||||||
Stretching before aging | % | ≥ 150 | ||||||||
Tensile strength after aging | Mpa | ≥ 12,5 | ||||||||
Stretching after aging | % | ≥ 125 | ||||||||
Pair 1 | Blue | |||||||||
Pair 2 | Orange | |||||||||
Pair 3 | Green | |||||||||
Pair 4 | Brown |