Unicable LNB converter QUAD with 2 universal ports of Inverto

The Inverto LNB is a Unicable satellite converter to transmit the satellite signal up to 4 receivers by the same coaxial cable.

What technical characteristics does the Unicable LNB of Inverto have?

• Low phase noise, HDTV-DVBS2 compatible
• Low Noise Figure
• Low energy consumption
• Very high polarization Cross insulation
• High frequency stability
• 2 universal ports

What technical specifications does the Unicable LNB of Inverto have?

• Low band input frequency range: 10.7 ~ 11.7 GHz
• Low band output frequency range: 950 ~ 1950 MHz
• Low band LO Frequency: 9.75 GHz
• High band input frequency range: 11.7 ~ 12.75 GHz
• High band output frequency range: 1100 ~ 2150 MHz
• High band LO Frequency: 10.6 GHz
• Noise Figure: 0.7 dB Max.
• LO Initial precision: +/- 1.0 MHz Max.
• Temperature: +/- 2.5 MHz Max.
• Phase noise (at 10 kHz): - 90 dBc / Hz Max.
• SCR conversion gain: 57 dB Min.
• Legacy conversion gain: 55 dB min.
• Ripple gain (bandwidth greater than 26 MHz): +/- 0.75 dB
• Gain variation (in full band): +/- 4 dB Max.
• Rejection of image: 40 dB min.
• 1 dB compression point (@ Output): 0.0 dBm Min.
• Cross polarization isolation: 22 dB Min.
• Spurious in band: 60 dBm max.
• Output IF: Channel 1 (SCR0) 1210 MHz
• Output IF: Channel 2 (SCR1) 1420 MHz
• Output IF: Channel 3 (SCR2) 1680 MHz
• Output IF: Channel 4 (SCR3) 2040 MHz
• Channel isolation: 20 dB Min.
• Legacy ports: 2
• Command extension: DiSEqC of SCR control signals based on EN-50494
• Legacy switch voltage control: <14.2 V (Vertical),> 15 V (Horizontal)
• Current consumption: 250 mA Max. @ 13.5 V
• Operating temperature: - 30 ° C ~ + 60 ° C
• Output impedance: 75 Ω
• Output connector: type F (female)
• Weight: 350 g