Mast of 3 meters long x 45 mm x 2 mm Televes
Televes 3 m high mast
The Televes mast 3010 is a mast of 3 meters in length and 45 mm in diameter, ideal for installations where it is necessary to raise the television antenna to better capture the signal.
It is also used to mount several antennas on the same mast. For example, the DTT antenna and the FM radio antenna.
The regulation indicates in this case that the minimum separation between antennas is 1 meter. In the upper part, the DTT antenna, one meter below the FM antenna and one meter more to hold the mast with two supports.
*Due to the length and/or size of the product, the indicated delivery time could be delayed.
The Televes 3010 mast is a mast of 3 meters high and 45mm in diameter.
What technical characteristics does the 3010 mast have?
- Carraqueado mast of 45 mm Ø, 2 mm thick.
- Bending moment: 299.70.
- Anti-corrosion protection Zinc + RPR
- Steel mast
- Great resistance to corrosion
- Dual treatment of galvanizing and reactive sealing (RPR).
- It allows to assemble it with other masts to extend its length.
- Fixation with screws.
We found other products you might like!
Support for screw-type mast L 300mm.€7.37 Tax included
Wall Screw Neck Support 'L' 200mm€5.03 Tax included
guy wire ring€14.75 Tax included
Mast of 2.5 meters x 40 mm diameter x 2 mm thick Televes€25.14 Tax included
Mast wall recessed mount ''U'' reinforced 500mm bracket€8.31 Tax included
Wall Mastil support Empotrable " I" 350mm€6.50 Tax included
3mm steel cable for 100m winds€37.75 Tax included
Mast 2,5m high and 35mm in diameter€15.72 Tax included
Mast 2.5 m. Carraqueado, 35 mm diameter, 1 mm thick.€18.90 Tax included
Winds mounting kit for Ø45mm Mast€31.53 Tax included