Satellite DiSEqC Switch 2 Inputs / 1 Output.
Satellite DiSEqC Switch 2 Inputs / 1 Output. Ref: 7268 Televes.
It is among the few DiSEqC allowing passage of the terrestrial signal. If you can use the DTT signal with the satellite and put it in the diseqc. This is useful for example in ICT facilities where there are two downpipes cables. Normally Land + SAT1 and SAT2 Land +. You can connect these two wires to TELEVES diseqc home and we both satellite signals, instead of just one.
This Satellite DiSEqC Switch has 2 inputs and 1 output, thereby facilitating the use of two satellite dishes aimed at two different Satellite. It is important that the receiver we use the DiSEqC 2.0 protocol support. We are facing an open standard protocol. DiSEqC control uses are: Parabolic robotic control, using a pulse system and motor. Allows selection of polarity voltages from 0 to 12V. Controls the polarity by applying voltage of between 13 and 18V. Select a particular repetition band tones using fixed frequency between 0 and 22 KHz
|System||DTT & SAT|
|TV-SAT Distribution Equipment||DiSEqC|
|TV-SAT Distribution Connection||F|
|TEL7268 Características Técnicas||49.7 KB||Download|