Terra UHF Analogue Modulator with 3 RCA Inputs, 1 RF Input and 1 RF Output

SKU
TERMT41
Brands: Terra
€46.74
Tax included
Availability: In stock
24/48 Hours

Terra MT41 UHF Analogue Modulator with RCA Inputs and RF Combining

The Terra MT41 converts an analogue CVBS composite video and RCA audio signal into a UHF RF television channel, allowing footage from a camera, recorder or media player to be distributed through the coaxial network of a home, business or communal installation. See other video modulators to compare distribution technologies.

It generates one analogue DSB channel configurable from 470 to 862 MHz, with a typical output level of 90 dBµV. It features an LED display, push-button control, adjustable RF output, PLL carrier stabilisation and non-volatile memory.

Its RF input combines the generated channel with the existing terrestrial television signal and allows several modulators to be connected in cascade. The RF input and output use F connectors for coaxial cable.

It is suitable for new installations and for extending or upgrading systems that retain analogue reception. It does not generate a DVB-T/T2 digital television signal: each television must have a compatible analogue tuner, normally PAL in installations in Spain.

Reference: TERMT41

-
+

Further information about the Terra MT41 UHF analogue modulator

Practical applications of the Terra MT41

Example 1: Distributing security camera footage in a home or business

An installer can connect the CVBS video and audio output of a CCTV recorder to the Terra MT41 to generate an analogue UHF television channel. The signal can then be injected into the coaxial network, allowing footage to be viewed on televisions equipped with a compatible analogue tuner. Its adjustable output level, channel selection and configuration memory provide greater control than a basic RF injector.

Example 2: Information channel for a hotel, bar or residential building

At the television headend, the modulator can convert the RCA output from a media player or information system into an analogue channel available at the connected television outlets. Its RF input can combine the generated channel with the existing terrestrial signal, while several modulators may be cascaded to add further content. A separation of at least two channels must be maintained between generated carriers.

Package contents of the Terra MT41 modulator

  • 1 × Terra MT41 UHF analogue modulator with power cable.
  • 1 × 75 Ω termination load for an unused RF input.
  • 1 × Adjustment screwdriver.
  • Mounting screws are not included.

Technical specifications of the Terra MT41 modulator

Feature Specification
Brand Terra
Model MT41
TDTprofesional SKU TERMT41
Manufacturer reference 12860V1
Product type Analogue television modulator
Number of generated channels 1
Modulation DSB, double sideband
Output band UHF
RF output frequency range 470-862 MHz
Configurable television standards G/H/I/L/K/M/N/Au
Video input 1 × RCA, CVBS composite video
Audio inputs 2 × RCA, AUDIO L and AUDIO R
RF combining input 1 × F connector
RF output 1 × F connector
Video input frequency range 20 Hz-6 MHz
Video input level and impedance 1 V ±0.1 V / 75 Ω
Audio input frequency range 20 Hz-15 kHz
Audio level adjustment 0-7 dB
Audio level and impedance 2 × 775 mV RMS / 10 kΩ
Audio deviation 50 kHz
Typical RF output level 90 dBµV
RF output impedance 75 Ω
RF output level adjustment 0 to -20 dB
Sound subcarrier frequencies 4.5 / 5.5 / 6.0 / 6.5 MHz
Video carrier fine-tuning Up to ±2.25 MHz in 0.25 MHz steps
Vision-to-sound ratio 12 or 16 dB
Typical amplitude modulation depth 81%
Weighted signal-to-noise ratio ≥55 dB
RF combining frequency range 5-862 MHz
RF combining through loss 1.5 dB
Controls Microprocessor, two-digit LED display and push buttons
Memory Non-volatile
Carrier stabilisation Crystal-stabilised PLL
Additional functions Test pattern, RF output on/off and settings lock
Power supply 230 V AC, 50/60 Hz
Power supply unit Built in
Power consumption 3.5 W
Operating temperature -10 to +50 °C
Installation environment Indoor use
Mounting position Vertical, with the power supply section on the left
Required ventilation clearance 10 cm above, in front of and below the unit
Suitable mounting screws Steel, Ø 3.5-4 mm; not included
Construction Die-cast housing inside a plastic enclosure
Packed dimensions 133 × 63 × 39 mm
Packed weight 0.36 kg
More Information
Hight 0.040
Length 0.180
Width 0.100
DTT System Analog Modulator
SERIES DTT F-connector
Color White
Entorno Interior
Input signal UHF
# Inputs 4
Outputs 1
LTE compatible No
Product Brand Terra
Write Your Own Review
You're reviewing:Terra UHF Analogue Modulator with 3 RCA Inputs, 1 RF Input and 1 RF Output
Your Rating
File Label Size Download
pdf Ficha Técnica Modulador Analógico UHF con 3 Entradas Tipo RCA 1 Entrada RF y 1 Salida RF de Terra 147.7 KB Download
We found other products you might like!
Our customers share their experience.
Google verified reviews: 4.9
★ ★ ★ ★ ★