Power Supply DIN10 230VAC/12VAC+18VDC 1.5A
Fermax 4810 Power Supply 230Vac/12Vac+18Vdc-1.5A
Device to power all the equipment of a Fermax door entry / video door entry system. Power supply in DIN10 rail format to install inside an electrical equipment box or screwed into the wall.
This power supply adapts a 230Vac 50 / 60Hz input into one 12V alternating (AC) + two 18V continuous (DC) outputs, with 1.5A output current. The source has two LEDs to indicate if it is operating, if there is an overcurrent or a short circuit.
DIN10 230Vac / 12Vac + 18Vdc 1.5A Power Supply for Fermax installations
What technical specifications does the Fermax 4810 Power Supply have?
- DIN 10 dimensions: 175 x 90 x 60 mm
- Input voltage: 230 Vac
- Output voltage: 12 Vac + 18 Vdc
- Output current: 1.5A
- Input protection: PTC and 2.3A fuse
- Output protection: Electronic limitation for overload and short circuit
- Input frequency: 50-60 Hz
- It has two operating indicator LEDs:
- Led ON lit: indicates that the feeder is working.
- Led OVERLOAD on: indicates maximum current exceeded, (it will be necessary to reduce the load of the installation or add additional power supply (s)).
- ON + OVERLOAD led flashing: indicates short circuit.
We found other products you might like!
Alimentador DIN4 230Vac/12Vac 1.5A Fermax€38.54 Tax included
Wibox WiFi adapter for VDS Fermax video intercoms€106.65 Tax included
33Vdc Power Supply for IKALL Entrance Panel€37.86 Tax included
Power Supply DIN6 100-240Vac/12Vdc 2A Fermax€130.45 Tax included
Fermax VDS 4110 video amplifier€60.88 Tax included
Power Supply+Filter DUOX PLUS DIN10 24Vdc 2.5A€86.52 Tax included
Power Supply DIN6 100-240Vac/18Vdc 1.5A€91.32 Tax included