Loading...

Recessed box size S1 8948 from Fermax

SKU
FER8948
Brands: Fermax
Availability: In stock
24/48 Hours
€4.96 Tax included
Fermax

S1 box for recessing 8948 by Fermax

To install a plate it is necessary to place a box on the wall or wall where we will later fix the plate.

The flush-mounted boxes are made of plastic and have hinges hinged in any direction, which allow to hold the plate while wiring is done.

They have circular marks split into the bottom of the box, which are punctured with a slight blow or pressure, thus allowing the passage of the cables.

The plate 8948 is Fermax is compatible with the plates of size S1

The box 8948 of Fermax is a box for embedding a street panel of doormen, video intercoms and keyboards Fermax S1, that is, all those plates whose measurements are 130X128mm.

What technical characteristics does the 8948 box have?

  • To install a plate it is necessary to place a box on the wall.
  • The flush-mounted boxes are made of plastic.
  • They have folding hinges in any direction, which allow to hold the plate while wiring is done.
  • They have circular marks split into the bottom of the box, which are punctured with a slight blow or pressure, thus allowing the passage of the cables.
  • In the case that several plates are combined, always of the same series, it is necessary to use a set of separators for a perfect coupling.
  • One set is required for each additional plate that is installed between the flush-mounted boxes.

What is a flush-mounted box used for?

A flush-mounted box, such as Fermax's 8948 caka, is used to install an S1-size Fermax street entrance panel in the wall.

More Information
EAN8424299089485
SystemAccessories
SERIESERIE 1
ColorBlack
Product BrandFermax
Write Your Own Review
You're reviewing:Recessed box size S1 8948 from Fermax
Your Rating