Hikvision 5 GHz 867 Mbps 5 km Wireless Bridge Kit

SKU
DS-3WF02-5AC/D
Brands: Hikvision
€135.31
Tax included
Availability: In stock
5 days

Hikvision 5 GHz 867 Mbps Wireless Bridge Kit with up to 5 km Range

The Hikvision DS-3WF02-5AC/D creates a network link between two locations up to 5 km apart, avoiding trenches or long cable runs between buildings. It includes two pre-paired wireless bridges for transmitting video and data over the 5 GHz band.

It is particularly suitable for connecting remote IP cameras to an NVR or central network. Its integrated 12 dBi 2 × 2 MIMO directional antenna, with a 35° beamwidth, provides a stable connection when the units are correctly aligned with a clear line of sight.

The 802.11ac wireless interface offers a maximum air-interface rate of 867 Mbps, while the physical interfaces are 10/100 Mbps RJ45 ports. The specified point-to-point throughput is 90 Mbps at up to 1 km and 40 Mbps at 5 km, an important consideration when comparing it with other point-to-point wireless bridges.

Both units are PoE-powered and supplied with two PoE power adapters. The CPE also provides an 802.3af PoE output with a 10 W power budget, allowing it to power a compatible IP camera directly through its second port.

Reference: DS-3WF02-5AC/D

-
+

Information about the Hikvision DS-3WF02-5AC/D 5 GHz 867 Mbps 5 km Wireless Bridge Kit

Practical applications of the Hikvision DS-3WF02-5AC/D

Example 1: Connecting an IP camera installed in a remote building

An installer can use the Hikvision DS-3WF02-5AC/D to transmit video and network data from an IP camera located in a separate warehouse, entrance or building to the NVR at the central site. With a clear line of sight and correct antenna alignment, the wireless bridge avoids digging trenches or installing hundreds of metres of cable. The CPE unit can also power a compatible IEEE 802.3af IP camera, provided that its consumption does not exceed the available 10 W PoE budget.

Example 2: Extending a video surveillance network between two locations

When expanding a CCTV system, the kit can connect the existing network to a new surveillance area located several kilometres away. Signal indicators, bridge alignment, spectrum scanning and remote management help the installer commission and maintain the link. Compared with a general-purpose Wi-Fi connection, its 12 dBi directional antenna, 35° beamwidth and pole-mounting design are specifically suited to stable outdoor point-to-point links.

Package contents of the Hikvision DS-3WF02-5AC/D

  • 2 × wireless bridge units
  • 2 × PoE power supplies
  • 2 × AC power cords
  • 1 × quick start guide
  • 1 × regulatory compliance and safety information document
  • 4 × binding tapes

Technical specifications Hikvision DS-3WF02-5AC/D

Feature Specification
Brand Hikvision
Model DS-3WF02-5AC/D
Product type Outdoor wireless bridge kit
Units supplied 2 pre-paired wireless bridge units
Maximum wireless distance Up to 5 km
Maximum air-interface rate ≤ 867 Mbps
Wireless standards IEEE 802.11a/n/ac
Operating frequency bands 5150–5250, 5250–5350, 5470–5725 and 5725–5825 MHz
Channel availability May vary according to local regulations
Antenna Integrated 2 × 2 MIMO directional antenna
Antenna gain 12 dBi
Antenna beamwidth 35° horizontal and 35° vertical at 3 dB
Transmit power 22 dBm at 11ac MCS0; may vary according to local regulations
Receiver sensitivity -84 ± 2 dBm at AC80-MCS0
PTP throughput at 0.5 km 90 Mbps, AC80
PTP throughput at 1 km 90 Mbps, AC80
PTP throughput at 5 km 40 Mbps, AC80
PTMP 1:4 throughput at 1 km 80 Mbps, AC80
Network interfaces 2 × 10/100 Mbps RJ45 ports per unit
PoE on AP unit LAN1 with IEEE 802.3af/at PoE input
PoE on CPE unit LAN1 with passive PoE input and LAN2 with IEEE 802.3af PoE output
PoE output power budget 10 W
PoE cable distance Up to 100 m
Power supply 48 V PoE or 12–24 VDC
DC power limitation PoE output is unavailable when the unit is powered through its DC input
Typical power consumption 2.43 W with one 2 MP IP camera
Maximum power consumption 3.6 W
LED indicators Power, LAN and signal strength
Reset Hardware reset button; press for 4 seconds to restore factory settings
Channel width 20, 40 or 80 MHz
Channel selection Automatic or manual
Wireless security WPA2-PSK and hidden wireless network name
Network protocols NTP, SADP, HTTPS/HTTP and SSH for debugging
Application functions IFM, IPM, DFS and TPC
Management HCP, web interface, iVMS-4200 and Hik-Partner Pro
Hik-Partner Pro functions Reboot, restore, topology display, link status, signal strength, background noise, data rates, wireless configuration, bridge alignment, spectrum scanning and PoE output management
System log Syslog and control centre information
Upgrade methods Web interface, iVMS-4200, HCP and Hik-Partner Pro
Installation Pole mounting
Ingress protection IP55
Operating temperature -30 °C to 65 °C
Operating humidity 5% to 95%, non-condensing
Storage temperature -40 °C to 80 °C
Storage humidity 5% to 95%, non-condensing
Dimensions per unit 90.8 × 187.87 × 57.87 mm
Net weight 0.26 kg per unit
Package dimensions 256 × 231 × 86 mm
Gross weight 1.1 kg
Main approvals CE-EMC, CE-LVD, CB, CE-RoHS, WEEE and REACH
More Information
EAN 6942160496948
Hight 0.000
Length 0.000
Width 0.000
REDES - System POE
REDES - SERIE Punto a Punto
Color White
Network Equipment Radio link
PoE Yes
Product Brand Hikvision
Write Your Own Review
You're reviewing:Hikvision 5 GHz 867 Mbps 5 km Wireless Bridge Kit
Your Rating
File Label Size Download
pdf Ficha Técnica Kit Enlace Inalámbrico 5Ghz 867Mbps 5 Km de Hikvision 770.1 KB Download
We found other products you might like!
Our customers share their experience.
Google verified reviews: 4.9
★ ★ ★ ★ ★