Iddero 3.5" KNX Touchscreen with Up to 36 Control Functions in White

SKU
VERSOQ-W
Brands: Iddero
€303.90
Tax included
Availability: On request
1 to 7 days

3.5" Iddero VERSO Q KNX Touchscreen in White GLASS Finish

The Iddero VERSOQ-W is a capacitive home automation touchscreen designed to centralise the control of a room equipped with KNX TP1. Its compact format and white GLASS finish replace several conventional controls with a single configurable wall-mounted interface.

It supports up to 36 control functions across 6 configurable pages, including switching, dimming, RGBW lighting, blinds, climate control and alarms. It also features two independent thermostats, an integrated temperature sensor, favourites, configurable backgrounds, and light and dark display modes.

Four multifunction inputs can connect conventional push-buttons, potential-free contacts or external temperature probes. Its five touch gestures execute quick actions even while the display is off, providing immediate access to frequently used commands.

The VERSO Q connects directly to the installation using KNX bus cable and requires a separate 12–30 VDC power supply, which is not included. It is suitable for new KNX installations and for upgrading or extending existing systems.

Reference: VERSOQ-W

Would you like us to notify you when stock arrives?

Leave your email and we will notify you when it is available again.

We will use your email for this alert and, only if you choose, for offers. Privacy policy

-
+

Extended information about the Iddero VERSO Q VERSOQ-W KNX Touchscreen

Practical applications of the Iddero VERSO Q KNX touchscreen

Example 1: Centralised control of a KNX-equipped room

In a home with dimmable lighting, motorised blinds and KNX climate control, the system integrator can bring the main functions together on a single VERSO Q touchscreen. RGBW controls, favourites and touch gestures provide quick access to frequently used commands without installing multiple independent wall controls.

Example 2: Control upgrade in an office or meeting room

When refurbishing a room equipped with KNX, the installer can use the Iddero VERSO Q to combine lighting, solar protection, temperature control and time schedules. Its four inputs can retain conventional push-buttons or accommodate contacts and external temperature probes, simplifying the upgrade of an existing installation.

Package contents of the Iddero VERSO Q KNX touchscreen

  • 1 × Iddero VERSO Q VERSOQ-W KNX touchscreen.

Technical specifications of the Iddero VERSO Q KNX touchscreen

Feature Specification
Brand / model Iddero VERSO Q
Reference VERSOQ-W
Finish White GLASS
Main application Room control and visualisation
System KNX TP1
Control functions Up to 36
Configurable pages 6
Available controls Indicators, push-buttons, dimming, rotary controls, blinds, RGB and RGBW
Favourites page User configurable, with up to 6 components
User interface Light and dark modes, configurable backgrounds and flexible page layouts
Page protection Four-digit PIN
Touch gestures 5 actions: 4 directional gestures and 1 multitouch gesture
Gestures with display off Yes, while in energy-saving mode
Time schedules Up to 36 channels, with 4 programmes per channel
Time schedule requirement Date and time received over KNX or set on the device
Alarm monitoring Up to 36 alarms
Thermostats 2 independent room thermostats
Temperature sensor Integrated
Temperature range 0 to 70 °C
Sensor resolution 0.1 °C
Sensor accuracy 1% at 25 °C
Sensor stabilisation Typically 1 hour after a cold start at 25 °C
Number of inputs 4 independent inputs
Input configuration Binary inputs or external temperature probe inputs
Binary input contact Potential-free contact
Binary input modes Push-button and switch/sensor
Detection time Typically 50 ms in switch/sensor mode
Minimum pulse width 10 ms in push-button mode
Maximum recommended cable length 50 m
Compatible external probes Iddero TS-N1PB and TS-GLASS
Input cable section 0.2–1.5 mm²
Display 3.5" TFT IPS, 4:3 format
Resolution 320 × 240 pixels
Colour depth 24 bpp, 16.7 million colours
Contrast 800:1 typical
Luminance Minimum 560 cd/m², software adjustable
Backlight Low-power white LED
Touch technology Projected capacitive multitouch
Viewing angle Typically 80° in all directions
Cover glass 0.55 mm chemically strengthened, high-visibility tempered glass
KNX connection Standard KNX TP1 connector
KNX bus consumption Typically 4 mA at 29 VDC
External power supply 12–30 VDC
Maximum power consumption 1.8 W
Typical consumption 75 mA at 12 VDC; 40 mA at 24 VDC; 35 mA at 30 VDC
Recommended power cable 0.5 mm²
Power supply unit Not included
Expansion port USB 2.0, Micro-USB type B
USB capacity Maximum 150 mA
Installation Wall mounting
Flush-mounting box Standard square or round box; Iddero E-C466 or E-C456
Flush-mounting box included No
Magnetic fixing 6 × N45 neodymium magnets, 0.6 kg holding force each
Optional retention system M3 ISO 4026 retaining screw
Enclosure material FR V0 polyamide
Protection rating IP20
Front dimensions 81.2 × 85 mm
Depth 13 mm
Weight 124 g without mounting frame; 155 g with mounting frame
Operating temperature 0 to 55 °C
Storage temperature −20 to 70 °C
Relative humidity 10–90%, non-condensing
Indicators KNX programming LED and buzzer
Directives 2014/30/EU, 2011/65/EU and 2012/19/EU
Harmonised standards EN IEC 63044-3:2018, EN IEC 63044-5-1:2020, EN IEC 63044-5-2:2020, EN 50491-2:2011, EN 63000:2018 and EN 50419:2022
More Information
Hight 0.000
Length 0.000
Width 0.000
Color White
Automation Panel
Product Brand Iddero
Write Your Own Review
You're reviewing:Iddero 3.5" KNX Touchscreen with Up to 36 Control Functions in White
Your Rating
File Label Size Download
pdf Ficha Técnica Pantalla Táctil KNX 3.5" con hasta 36 Funciones de Control en color Blanco de Iddero 315.2 KB Download
We found other products you might like!
Our customers share their experience.
Google verified reviews: 4.9
★ ★ ★ ★ ★