Iddero 3.5" KNX Touch Panel in Black with Up to 36 Control Functions

SKU
VERSOQ-B
Brands: Iddero
€303.90
Tax included
Availability: On request
1 to 7 days

Iddero VERSO Q 3.5" KNX Capacitive Touch Panel in Black

The Iddero VERSO Q VERSOQ-B is a touch panel for home and building automation designed to monitor, control and automate KNX TP1 installations. Its compact wall-mounted format and black GLASS finish provide a central interface for managing lighting, blinds and climate control in a room.

It supports up to 36 control functions across 6 configurable pages, including dimming, RGBW lighting, blinds, schedules, alarms and favourites. It also recognises five touch gestures for launching quick actions, even when the display is switched off in energy-saving mode.

The panel includes an integrated temperature sensor, two independent thermostats and four multifunction inputs for push buttons, potential-free contacts or compatible external probes. It connects directly through a KNX TP1 bus cable and requires a 12–30 VDC external power supply, such as the Iddero E-PSU3012 DIN-rail power supply.

The Iddero VERSO Q 3.5" touch panel is suitable for new KNX installations and for extending or upgrading homes, offices and other buildings. It centralises room control in a single device, although it does not include IP connectivity and must be configured using ETS.

Reference: VERSOQ-B

Would you like us to notify you when stock arrives?

Leave your email and we will notify you when it is available again.

We will use your email for this alert and, only if you choose, for offers. Privacy policy

-
+

Extended information about the Iddero 3.5" KNX Touch Panel in Black with Up to 36 Control Functions

Practical applications of the Iddero VERSO Q KNX touch panel

Example 1: Integrated room control in a KNX home

In a new residential KNX installation, the integrator can install the Iddero VERSO Q in the living room to centralise lighting dimming, RGBW control, blinds and climate management. Frequently used functions can be added to the favourites page or assigned to touch gestures, while its two independent thermostats can manage two HVAC zones configured in the KNX project.

Example 2: Upgrading the controls in an existing office

When refurbishing an office equipped with a KNX TP1 bus, the installer can add the VERSOQ-B to replace several conventional control points with one configurable interface. Its four rear inputs can retain existing push buttons or connect potential-free contacts and compatible temperature probes, expanding the installation without requiring a separate input module next to the panel.

Package contents of the Iddero VERSO Q touch panel

  • 1 × Iddero VERSO Q VERSOQ-B capacitive touch panel with black GLASS finish.

Technical specifications of the Iddero VERSO Q VERSOQ-B KNX touch panel

Feature Specification
Manufacturer Iddero
Model VERSO Q
Reference VERSOQ-B
Product type KNX capacitive touch panel and room controller
Finish Black GLASS
Installation Wall mounted
Automation system KNX TP1
Control functions Up to 36
Configurable pages 6
Components per page Up to 6
Available controls Indicators, push buttons, double push buttons, regulation bars, rotary controls, numeric keypads, dimmers, shutters and RGB/RGBW controls
Favourites page User configurable with up to 6 components
Interface modes Light and dark modes
Backgrounds Configurable background images
Page protection Password protection available
Time schedules Up to 36 channels with 4 programmes per channel; date and time must be received from the KNX bus
Alarm monitoring Up to 36 visual and audible alarms
Touch gestures 5 quick actions: 4 directional gestures and 1 multitouch gesture
Gestures with display switched off Available while the device is in energy-saving mode
Thermostats 2 independent thermostats
Integrated sensor Temperature sensor
Temperature range 0–70 °C
Sensor resolution 0.1 °C
Sensor accuracy 1% at 25 °C
Sensor stabilisation time Typically 1 hour after a cold start at an ambient temperature of 25 °C
Multifunction inputs 4 independent inputs
Input configuration Binary inputs in push-button or switch/sensor mode, or external temperature probe inputs
Binary contacts Potential-free contacts
Detection time Typically 50 ms in switch/sensor mode
Minimum pulse width 10 ms in push-button mode
Recommended input cable length Maximum 50 m
Input cable cross-section 0.2–1.5 mm²
Compatible temperature probes Iddero TS-N1PB and TS-GLASS
Display 3.5" TFT display, 4:3 format, IPS technology
Resolution 320 × 240 pixels
Colour depth 24 bpp, 16.7 million colours
Contrast ratio 800:1 typical
Luminance Minimum 560 cd/m², software adjustable
Viewing angle Typically 80° in all directions
Touch technology Projected capacitive multitouch screen
Cover glass 0.55 mm high-visibility tempered glass, chemically strengthened
Backlight Low-power white LED backlight with energy-saving mode
IP connectivity Not included
KNX connection Standard KNX TP1 connector
KNX bus consumption Typically 4 mA at 29 VDC
External power supply 12–30 VDC
Maximum power consumption 1.8 W
Typical current consumption 75 mA at 12 VDC, 40 mA at 24 VDC and 35 mA at 30 VDC
Power connection Pluggable terminal block with 3.5 mm pitch
Recommended power cable 0.5 mm² conductor cross-section
Expansion port USB 2.0
USB connector Micro-USB Type-B
USB capacity Maximum 150 mA
Controls and indicators KNX programming button, KNX programming LED and buzzer
Enclosure material FR V0 polyamide
Protection rating IP20
Magnetic fixing 6 N45 neodymium magnets with a holding force of 0.6 kg per magnet
Optional retention system M3 flat-point hexagon socket set screw, ISO 4026
Flush-mounting box Standard square or round back box; Iddero E-C466 or E-C456
Front dimensions 85 × 81.2 mm
Visible front depth 13 mm
Specified overall depth 44.5 mm
Mounting chassis 78.2 × 74.4 × 8 mm
Weight 124 g without mounting chassis; 155 g with mounting chassis
Operating temperature 0–55 °C
Storage temperature −20–70 °C
Relative humidity 10–90%, non-condensing
Configuration ETS using the Iddero VERSO Q application programme
Directives 2014/30/EC, 2011/65/EC and 2012/19/EC
Harmonised standards EN IEC 63044-3:2018, EN IEC 63044-5-1:2020, EN IEC 63044-5-2:2020, EN 50491-2:2011, EN 63000:2018 and EN 50419:2022
More Information
Hight 0.000
Length 0.000
Width 0.000
Color Black
Automation Panel
Product Brand Iddero
Write Your Own Review
You're reviewing:Iddero 3.5" KNX Touch Panel in Black with Up to 36 Control Functions
Your Rating
File Label Size Download
jpg Ficha Técnica Pantalla Táctil KNX 3.5" con hasta 36 Funciones de Control en color Negro de Iddero 223.7 KB Download
We found other products you might like!
Our customers share their experience.
Google verified reviews: 4.9
★ ★ ★ ★ ★