180 SE Tower Fixed Bolting Base Zinc + RCP Televes
Fixed Screw Base for 180 SE Tower Televes 3020
Rigid base plate for anchoring the Televes 180 SE series turret, 5 meters high. Base with zinc-plated anti-corrosion + RCP treatment for durability, with a Gray finish.
This base is designed to be bolted to the ground, it is fixed and does not require winds to hold the turret. The coupling with the turret is mortise, with locking by side screws.
The 180 SE tower elements are not compatible with 180 towers.
Fixed Screw Base for Televes 180 SE Tower, with Zinc + RCP treatment
What are the main features of the 180 SE Televes 3020 Base?
- Embedded coupling (locked by a lateral screw)
- Maximum height of the 180 SE tower: 5m
- Zinc coating + RCP
- Fixed, no need for guy wires
|Max. Tower Height||5 m|
|Tower Width||180 mm|
|Tower Base Mount||Screwed|
|Ficha técnica de Base Fija de Atornillar 180 SE Televes 3020||645.4 KB||Download|
We found other products you might like!
180 SE Tower Middle Section 2.5m Zinc + RCP Televes€108.17 Tax included
175mm turret fixed base for bolting to floor€13.42 Tax included
fixed base turret 250 mm to screw down€50.75 Tax included
Fixed base recessed tower 450 Zinc + RPR€519.34 Tax included
180 SE Tower Upper Section with Ring 2.5m Zinc + RCP Televes€130.61 Tax included
Dowel, Lag Screw and Washer Kit (4 units)€1.85 Tax included
Turret 250 mm 2.5m intermediate section€196.02 Tax included
Cable of 5mm steel in coil of 100 meters 3059 of Televes€124.15 Tax included
37/5000 8x60mm metric screw metal stud€0.46 Tax included
180 SE Tower Upper Section 1.25m Zinc + RCP Televes€83.13 Tax included