Kit 80 cm dish Daxis, LNB and Support
80 cm parabolic antenna kit from Daxis, LNB and support.
This parabolic antenna, LNB and support kit has everything you need to receive the Astra 19E and Hispasat 30W satellites.
This economical kit allows the installation of a parabolic antenna of 80 cm in diameter in a wall or railing thanks to the support that incorporates, besides allowing the reception of the aforementioned satellites thanks to the LNB. It also includes the hardware and the attachment for the installation of the antenna to the support.
This kit does not include hardware or dowels for mounting the bracket to the wall. The connectors and the coaxial cable to perform the roll up to the decoder are not included either.
With the 80 cm parabolic antenna kit from Daxis, LNB and support you can enjoy the free channels received by the satellites Astra 19E and Hispasat 30W.
This kit is very used by the installers of Movistar + (Antiguo Canal +).
What does this kit include?
- 80 cm parabolic antenna. Of diameter of Daxis.
- Diameter of 730 x 800 mm.
- Focal length 530 mm.
- Efficiency greater than 70%.
- Electrocuted sheet steel reflector.
- Reflector thickness 0.65 / 1.2 mm.
- Offset angle of 26º.
- Gain from 36 dB to 10.70 Ghz.
- Gain from 37.5 dB to 11.70 Ghz.
- Gain from 38.1 dB to 12.75 Ghz.
- Economic LNB, which may vary according to availability, has the following specifications:
- 1 Output.
- Type F connector.
- 75Ω Impedance
- Support for antenna of 80 cm.
How to install a satellite dish?
In order to install a satellite dish, a hammer, drill, drill, wrench, handle for the positioning of the plugs, compass and marker are required, as well as all the components of the satellite dish.
You have to choose the ideal point to install the satellite dish, which has to be free of obstacles to collect the best signal. Once this is done, the support must be placed on the wall (check that the plate is well horizontal with one level).
Then the antenna should be placed, better with the dish facing downwards following the instructions given by the manufacturer to attach the antenna arm and place the support. The antenna hangs on the bracket leaving the screws somewhat loose for lifting and turning.
|Size||80 cm to 95 cm|
|Mast max. diameter||60 mm|